How can I get my Canon MP390 printer that flashing ';WASTE INK FULL'; to print?

I have a Canon MP390 printer that stop printing and and flashing a reading ';WASTE INK FULL'; Can any help me correct this problem.How can I get my Canon MP390 printer that flashing ';WASTE INK FULL'; to print?
1)Printer on, press Additional Functions, Scan, Copy, Scan


Now you should be in service mode from there look for waste ink tank reset





2)Select Test mode which is like the last avalabe selection


3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other option this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button





The menu will now say EEPRON Clear


Select Ink count which is option (0) and press set





Then press Stop/Reset Followed by the power button and then wait for it to restart.How can I get my Canon MP390 printer that flashing ';WASTE INK FULL'; to print?
I had the same problem and this worked just great! THANK!!!! Report Abuse

refill shops usually just resets the cartridge chip for these problems. so if you have a resetter, try resetting the chip. if you don't try going to a refill station and have them do it for you.